|
Post by derby111 on Jul 25, 2012 12:35:22 GMT -5
I comment after people post pics ;D
|
|
|
Post by scooter24d on Jul 25, 2012 13:43:11 GMT -5
it's not hurting my feelings or nothing lol heres some more pics this is the drive shaft i made for it 727 end that goes in the tranny and the back half is from the imp took it for a test drive and everything is working good still got alot of work to do so might have more pics up later
|
|
|
Post by tomot1999 on Jul 25, 2012 18:27:13 GMT -5
I'll be interested to see what the rear dose. Where not allowed to chain our humps and most I've seen run with rear bumpers hump up real bad. Good luck with it. Tom
|
|
|
Post by scooter24d on Jul 25, 2012 20:47:45 GMT -5
thanks Tom and i don't have the humps chained i did that on my imp and didn't like how it went and i'm taking them off my shocker to spring clamps is all it will have i dimple these car so it shouldn't hump up i have seen alot do that also but the dimple has never failed me yet any thing can happen out there tho it could hit the deck lol ;Di did my loop system on it for rad. i'm going to change the rear tires with my shocker so theres more tire room and i got to get the front higher so the front will be solid with it missing 1 torsion bar some thing new i'm trying lol
|
|
|
Post by 2old4this on Jul 26, 2012 10:00:39 GMT -5
My neighbors cat hacked up something the other day and it looked just like this. Without the flags of course. Are they giving away an ugly car award this year?
|
|
|
Post by scooter24d on Jul 26, 2012 13:02:40 GMT -5
poor cat they should have a ugly car award i bet i would get in that lol got my gas tank protector welded to the seat bar and the 9 wire is done
|
|
|
Post by scooter24d on Jul 27, 2012 12:18:36 GMT -5
got the front end up in the air and folded the hood over
|
|
|
Post by scooter24d on Jul 27, 2012 19:49:25 GMT -5
got the gas tank bolted in spring clamps on cover off rearend to weld it and all the hood bolts are done it will be done this weekend o and i lost brakes so looks like i'm down to one front brake ::)better here then at the derby i guess
|
|
|
Post by tomot1999 on Jul 27, 2012 20:22:44 GMT -5
So I'm guessing you removed the tortion bar that usally gets into the crank pulley, what did you do to get front end hight? Car looks good to. Tom
|
|
|
Post by derby111 on Jul 27, 2012 23:20:16 GMT -5
That thing looks awesome it should hold up good! ;D
|
|
|
Post by scooter24d on Jul 28, 2012 8:01:30 GMT -5
thanks guys i chained down the a-arms and it was the torsion bar under the crank pully i took out hope it all works out thats what killed my imp so that wont happen to this one lol
|
|
|
Post by scooter24d on Jul 28, 2012 19:54:17 GMT -5
got the rearend welded and bumper straps and some door straps done she should be all done tomorrow if all goes well
|
|
|
Post by scooter24d on Jul 29, 2012 21:18:42 GMT -5
|
|
|
Post by derby111 on Jul 29, 2012 22:38:56 GMT -5
Is that the stock front bumper? I thought they were just skins?
|
|
|
Post by scooter24d on Jul 30, 2012 7:17:33 GMT -5
yes it has stock bumpers and are just skins these cars dont need a strong bumpers or it will hurt it in other spots of the car people look at these bumpers as junk but they are alot stronger then people think ;D
|
|