|
Post by fordlord on Feb 20, 2010 20:55:12 GMT -5
Does anyone have any tilting pics or pics showing how to tilt ?
|
|
|
Post by hardhitinu on Feb 21, 2010 22:49:45 GMT -5
Does anyone have any tilting pics or pics showing how to tilt ? good question cause I'd like to know how to do this to.
|
|
|
Post by helm024j on Apr 19, 2010 21:58:44 GMT -5
not sure if its rite. but we blocked the frame,cut the top and side welds leaving the bottom attached where the frame meets the crush boxes.pulled down on the front frame horns till it looked level then welded it back together
|
|
|
Post by 82 on Apr 19, 2010 23:07:44 GMT -5
not sure if its rite. but we blocked the frame,cut the top and side welds leaving the bottom attached where the frame meets the crush boxes.pulled down on the front frame horns till it looked level then welded it back together Sounds like you have it. That is basically how I do it. I like to use a tape measure though. I have had the best luck at about 4 1/2 inches of drop.
|
|