|
Post by fordlord on Feb 21, 2010 2:17:14 GMT -5
Ok i have a issue here...how do you remove the brake caliper on a 1987 ISUZU SPACE CAB TRUCK? the bottom bolt comes out but the top bolt does'nt have a head.its not broken off,its just not a head at all....
|
|
muddevil01
Rookie
It's not about how hard you hit it"s about how hard you can get hit and keep moving foward
Posts: 4
|
Post by muddevil01 on Feb 23, 2010 21:50:36 GMT -5
could it be an allen head bolt I have one of these trucks in my stash if I get a chance I will look and see what I can see
|
|
|
Post by fordlord on Feb 23, 2010 22:16:08 GMT -5
could it be an allen head bolt I have one of these trucks in my stash if I get a chance I will look and see what I can see no allen head either...if you do look, i would appreciate it alot...thanx Scott
|
|
|
Post by oldcut73c2 on Mar 14, 2010 17:06:24 GMT -5
Some of those foreign vehicles only have one bolt, the top one is just a pivot. You can usually take out the lower bolt swing the caliper up and push it back off of the upper pivot stud. hope that helps.
|
|
|
Post by fordlord on Mar 14, 2010 17:52:25 GMT -5
Some of those foreign vehicles only have one bolt, the top one is just a pivot. You can usually take out the lower bolt swing the caliper up and push it back off of the upper pivot stud. hope that helps. Really?....so you just push it away from you? I will give it a go, and see what happens. I hope it helps too because i miss driving and making extra money with this truck.. Thanks for the advice Scott
|
|