Post by derbyfreak14 on Feb 28, 2010 21:28:38 GMT -5
$1000 to win Fullsize cars any year $30 to start feature.
Minis $300 to win bases on 7 cars.
$200 to win mowers If 20 mowers show, we will run 2 separate features. All mowers run feature #1 $200 to win. All mowers that can come back will run feature #2 $200 to win.
1. The cars are to be constructed according to the rules. If certain items are not specified, it doesn't mean it is legal. The judge's decision will be final, so call before you do something that you don't understand.
2. All cars must be on grounds one-hour before event to be inspected. Any cars arriving late will not be eligible to compete unless prior arrangements have been made. All cars must be removed immediately after the show or they will become the property of the local salvage yard.
3. The driver must be at least 18 years old to drive at all fairs, unless the fair board allows younger drivers. You must be able to prove age upon request to drive, or have a notarized document signed by a parent or guardian stating that parents assume all risks. No one under the age of 14 will be able to compete at any fair unless approved by fair board. Call first.
4. Approved racing helmets must be worn at all times. Goggles or a face shield, fire suit or long sleeve shirt must be worn. Long pants and closed toe shoes are mandatory. No shorts allowed. If a driver removes his/her helmet while the event is taking place they will forfeit all winnings and be disqualified for the night.
5. Any unsportsman like conduct by the driver or the crew will cause your car to be disqualified and forfeit of any winnings. The judge's decision will be final.
6. No liquor or intoxicating beverages allowed in pit area. Possession of alcohol or drugs in pits will result in disqualification of your car.
7. Drivers meeting will be held before the event is to start to explain rules and flags. Any car protest must be made at this time. All drivers must attend, attendance will be taken. If a driver misses for any reason, there car will be disqualified. All drivers meetings will be held 30 min. before start time.
8. A driver that is disqualified in the heat race for sandbagging or a intentional door hit, will not be allowed to compete anymore that evening. Heat race time limits and sandbagging marks will be used.
9. The purpose of the derby is to provide entertainment for the spectators. Anyone not complying with the rules will be barred from the event.
10. It is mandatory for everyone entering into the pits to purchase a pit pass.
11. If a car is found illegal, no entries will be refunded. Cars should be brought legal. Not having a set of rules is not our fault. The fair board or promoter reserves the right to approve or reject any entries. Cars will be subject to inspection after event.
12. The driver is the only person allowed to drive the car at the venue. The driver is the only person allowed around the car while their car is being inspected. Cars will be disqualified if rule is not followed.
PREPARATION OF CAR:
No trucks, vans, ambulances, jeeps, carry-alls, limousines, Hearse, 4-wheel drives, checker cabs, propane cars, 73 or older Chrysler imperials. No Chrysler bodies on imperial frames. 2003 and newer Fords must remain factory (drive line, rear end, and bumpers are the only things that can be changed). This includes the cradle. In 2010, there is to be no shortening of rear frame rails in any manner. In the matter of clipping cars, there is to be no MIX-MATCHING of frames. Ford to Ford. GM-to-GM ECT. No shortening of cars in 2010. Cars are to be constructed according to rules. Judges decision is FINAL.
FRAMES:
1.There is to be NO painting of frames. If you are painting a frame you are cheating and you won't run.
2. ALL factory frame holes must remain OPEN
3. All cars may be pitched in the front. There is to be no metal added when pitching a car.
4. The rear humps may be plated. The plate may be ¼ in. steel, maximum 22 inches in length from end to end, must be cut to contour of frame, placed in center of hump and this plate must be on the outside only. The rear arch plate must have no more curve than a crescent shape.
5. A 3x3 Washer may be welded over the CENTER of each body mount hole. TOP SIDE ONLY.
6. You may have a 5 inch long piece of angle welded to frame to set the cross member on if you like
7. All cars must use the factory core support mounts. There is to be no welding of angle iron or pipe to the side of the frame to mount your core support. This mount is considered a body mount. It can ONLY be strengthened with a 3x3 washer. Fords must run factory mounts.
8. You may have ball joint stops, but they must be bolted on only.
9. On 80-89 Ford's, you may add the Factory gusset behind the crush box. This is the gusset that is found on 90 and newer cars. This gusset must be installed in the factory manner. When adding these gussets you MUST paint them WHITE.
10. No welding, plating, or pinning of frames. You may weld the top seam from the front of the A-Arms forward. NO OTHER FRAME SEAMS MAY BE WELDED.
11. You may repair a bent frame. You may only use 4 plates no larger than 4x6. Plates may be welded on all 4 sides. No more than 2 patches on any corner of the car. No part of the patch OR the weld may touch. 4 Patches MUST be painted white. You may reclip a bent car. When doing this, you may only use the butt weld method.
12. Rust damage may be repaired with the same size metal. No more than a 1-inch over lap.
ENGINGES:
1.Engines and transmissions may be interchanged.
2. Motor mounts may be welded, but no extra bracing to frame.
3. NO SKID PLATES. Oil pans and transmission pans may be strengthened.
4. Radiators must remain in stock location. You cannot run extra radiators or water supplies.
5. Transmission and oil coolers are allowed.
6.Transmission/oil coolers and battery boxes cannot strengthen frame in anyway
7. Batteries must be moved. You can use 2 batteries, but they must be securely mounted in passenger side floorboard area. Batteries must be covered.
8. All fuel cells and fuel lines must be covered in area where they may become pinched or cut.
9. Engine Mounting plates are legal, but they cannot connect to anything but the engine. They cannot reinforce the car in any way.
10. You may have 2 spots of wire or chain coming off front side of motor going to the engine cradle only
Tires:
No studded tires. Valve stem protectors are OK. We do not want flats.
CAGES: Standard 4 point cage MAX.
1. A cage of no bigger than 4 in. pipe or 4x4 in. box tubing can be used. (Standard 4 Point Cage Only) 4in MAX! (This will be enforced in 2010).
2. The front 2 down legs can be welded to the topside of frame only (welded to the side rail only). These legs must be vertical and cannot have plates or gussets welded off of them going to the frame. They MAYNOT be welded to the front clip in any way.
3. Front bar of cage running under dash must be 6 in. behind front firewall. It cannot have kicker going to the firewall. There is to be nothing welded from the dash bar going to the firewall or butted to the firewall. Only 1 dash bar.
4.The cage may have an overhead bar or roll over bar. The roll bar must be straight up and down, no pitch towards rear of car. The down legs may be welded to the topside of the frame only. This bar must be within 6 inches of the doorpost. 2 door cars, 6in from the back of the drivers seat. (This will be measure with steel block).
5.Sidebars no longer than 4in. past dash or rear bar.
6. Drivers may add 1 down bar next to their seat or legs. This bar is for safety only. The bar can only connect to the driver's door bar. It must be vertical and must be at least 12 in behind the front cage leg.
Protectors: In 2010 we will be using a steel 6in block to measure in between the dash bar and the firewall. Also from the gas tank protector to the rear firewall. Any part of the cage that prevents the block from passing thru will have to be cut. (Must be 6in at the top and bottom of bar). DP= Distributor Protector
1. DP's are legal in the follow manner. They can be no wider than the intake. They must be straight up and down only. DP's may bolt to the engine ONLY!
2. DP's can be butted to the firewall. (NO WELDING, BOLTING, OR ATTATCHING PROTECTORS TO THE FIRE WALL). Dash bar must be 6in behind firewall.
3. Protector cannot strengthen frame in anyway.
4. Cars running windshield bars may only tack weld the bar to the firewall 6in to either side of the DP. 2 bars max.
5. If you run a DP, you may not have anything running from the firewall to the dash bar. (No all-thread, bars, or any other solid material.)
6.You may run a gas tank protector in the following manner.
7. Gas tank Protector may not be any more than 36 inches wide.
8. Protector must be at least 6in from rear firewall. Do not beat firewall back.
9. Protector must be at least 3 inches off the floor.
10. The protector may not connect to anything other than the seat bar of the cage.
BODY: cars must be stripped of all flammable materials.
1.Doors may be welded solid, including the tops of doors. 3in strapping max.
2.Body mounts may be changed. Max bolt size 1in. Mounts cannot go thru the bottom side of the frame. Body mount washers cannot exceed 4x4. . Body bushings may be removed, but must use a 1in spacer in its place.
3. ROOF SIGNS ARE MANDITORY! They may be welded or bolted. Signs may not be any more than 24 in. long.
5. A 12 in. hole must be cut in hood above carburetor. Half hoods on car are OK. If no hood, no fan on motor. If fan blades become exposed, car is disqualified.
6. Hood is allowed 6 fasteners. Neither the hood nor any wires can be bent down in front of radiator. Hood Washers may be no more than 6x6.
7. Core Support may be bolted down with All thread 1 in. maximum may be ran thru core support next to radiator only, one on each side. They can go thru the hood.
8. No bolting or welding of body panels together, with the exception of fender wells. Fender wells may be bolted together using 4 bolts 5/16ths or smaller.
9. Rusty panels may be patched by using no more than 1in overlap. You must patch rust with the same thickness of metal, if thicker metal is used it will be cut off.
10. If car has been previously ran, we would allow you to repair body to keep it from falling off.
11. No internal bracing of body.
12. No interior seam welding on any body parts.
13. There can be no bars in the rear window
14. Car must have a safety strap in place of windshield. If using a bar or welded strap, they may be welded to the fire wall no closer than 6in. from the edge of the DP.
3.Firewalls must be in original place with no extra metal or weld added. All holes must be covered to prevent hot fluids from entering the driver's compartment.
TRUNKS:
1.A 12 in. hole must appear in trunk lid, not in the trunk floor. Tail light areas must remain open. TAIL LIGHT HOLES DO NOT MAKE YOU 12IN HOLE.
2. No wedged cars. (Unless it happens naturally during the derby) Trunks may be tucked.
3. Trunk lids can be welded solid with 3-inch wide strips 1/4 thick and cannot be overlapped. Strapping cannot be welded to rear window post. Trunk lids may not be moved.
4. Trunks may be "V'd" in the center but the back quarters must remain in the stock position. If you rip the rear post when V'ing the trunk, YOU CANNOT PATCH IT! If a car has a patch on the rear post (that is not rusty), they will cut the entire patch and the entire weld off the post.
5. Speaker trays may be beat down or removed, but they may not be altered with weld.
6.You may have 1 piece of 1 inch all thread in the center of the trunk with max 3x3 washers. Tail light areas must remain open.
7. You may weld 2 straps from you trunk lid to the bumper. These straps may not exceed 3in. in width.
8. All creased cars will have to cut inspection holes in creases per judge's decision. 1-3 per side depending on how the creases are made.
BUMPERS:
1.Any year car bumper and bumper brackets allowed on any car.
2. The bumper must be fastened with factory brackets no homemade brackets.
3. You cannot use rear brackets on the front of the car.
4. Bumpers can be welded solid to the frame. You may weld straps from the bumper to the frame on all 4 sides. Straps may only be welded to the first 2 in. of the frame.
5. Bumpers cannot be welded to the body.
6. Bumpers must have factory skin and factory backing.
7. You may load the inside of the bumper if you like. You can weld the bumper skin.
8. Maximum bumper height is 24 in. to bottom of bumper, minimum is 16 in. In 2010 this will be checked before the heats.
9.You may hard nose a bumper. You may stub the frame back to core support mount. Core support mounts may not be relocated. You may weld shock to the frame back to factory bolting spot. No welding past that point. Shocks may only be bolted in factory manner. No relocating bolts.
SUSPENSION:
1. All suspensions must have the ability to work in the factory manner.
2.You may bolt the front suspension solid with one 1/2 bolt per side. The head of the bold may be welded to the frame.
3. No all thread for shocks.
4. Any factory 5-lug axle rear end allowed. No 8-lug conversions. No changing of coil to leaf springs.
5. Coil springs may be tack welded or wired to brackets.
6. Rear end protectors cannot come within 6 inches of frame.
7. On leaf spring cars, no more than 7 per side and no wider than 2-½ inches. No Flat springs. Factory Stagger. No leafs on top of main leaf. No leafs thicker than 1/4in. 8. Only 3 leaf clamps per side. These clamps can be no wider than 3 inches and leafs cannot be welded together.
9.You may modify or weld tie rod ends and control arms.
10. Sway bar may be modified, but can not strengthen the frame.
11. Rear suspension must move.
12. Control arms may be strengthened.
Minis & Mini Car Enduro
1. All above rules apply to mini cars.
2. No AMC's
3. Cars can have a maximum of 108 in. wheelbase. Wheelbase can not be altered to achieve 110in.
4. Cars with electric fuel pumps must be wired to shutoff by switch that is clearly marked.
5.Cars may run any motor or tranny combination, no reinforcement of motor cradle.
6. Leaf spring cars must run factory leaf setup.
7.Cars can run gas tank protectors. They are to be constructed in this manner. Gas tank must connect to cage. You may use 2 pieces of 4x4 angle iron and 1 piece of ¼ in plate to box it in. Tank must be mounted so that long side of tank is parallel with seat bar.
TRUCK RULES:
Any full size or ¾ truck allowed. 4x4 trucks are legal, but front drive shaft must be removed. S.U.V.'s and Vans are legal.
Fuel Tank: Stock fuel tanks must be removed. A METAL boat tank or fuel cell must be placed in the bed of the truck, against the cab. Fuel line must be mounted securely.
Body: Doors must me welded or wired shut. But must be bolted or welded to the cab. Rust can be patched with same gauge metal, no more than 1-inch overlap. Truck beds may be interchanged but must utilize factory frame mounts. May only run Factory style beds, No utility or homemade beds. Body can be bolted solid to frame. Body mount bolts may be replaced with bolts no lager than 1in. Washers may be no bigger than 3in x3in. Tailgates may be welded solid. Tailgates may be dropped. You may run 9 wire from bedside to bed side in 1 place. May bolt hood down with max 6 1-inch bolts.
Cage: You may run a 4-point cage inside the cab of the truck. Cage can be welded to the frame. You can run a gas tank protector in the bed of the truck. It may not connect to cage. Protector can only be 36 in wide. This is to protect gas tank only.
Bumpers: May use any OEM automotive bumper (no farm Bumpers). Bumper must have a factory front and back skin. Bumpers can be welded together. Trucks may use home made mounting brackets. Brackets may be welded to the frame. Brackets can be no larger than 6 inches. NO OTHER WELDING ON THE FRAME ANYWHERE.
Drive Line: Any motor transmission combination. 8Lug rear ends are OK.
Suspension: Leafs have to be stock or less than stock, no flat leafs must have an arch to them. 3 claps per side.
Tires: No paddles, no v-treads. No split Rims. No bead locks.
MOWER RULES
1. MOWER MUST BE A FACTORY AVAILABLE MOWER LAWN OR GARDEN MOWER (NO HOME MADE FRAMES)
2. NO REAR ENGINE LAWN MOWERS ARE ALLOWED.
3. ENGINE MUST BE FACTORY LAWN MOWER ENGINE SUCH AS BRIGGS & STRATTON, TECUMSEH, ONAN ETC.
4. ALL FRAME MODIFICATION AND FRAME REINFORCING WILL BE ALLOWED.
5. TRANSAXLES MUST BE FACTORY AVAILABLE MOWER TRANSAXLES BUT ANY REINFORCING AND/OR WELDING OF SPIDER GEARS IS PERMITTED
6. ENGINE BAY REINFORCING IS PERMITTED BUT MUST BE CONTAINED INSIDE OF HOOD AND MUST MAINTAIN FACTORY BODY LINES
7. ALL MOWERS MUST RUN A FACTORY HOOD AND FENDERS AND HAVE THE HOOD EITHER SCREWED OR WELDED DOWN TO DASH PANEL AROUND DRIVERS AREA ( NOTE IF HOOD IS FIBERGLASS YOU CAN MAKE ONE OUT OF SHEET METAL ONLY BUT MUST BE THE SAME SIZE AS THE FIBERGLASS ONE)
8. MOWERS MUST HAVE GOOD BRAKES AND FORWARD AND REVERSE GEARS AT THE START OF THE HEAT.
9. GAS TANK MUST BE SECURED AND HAVE A CAP ON IT (ANY GAS AT ALL LEAKING AND YOU WILL BE ASK TO SHUT IT DOWN)
10. LEG GUARDS ARE MANDATORY AND MUST BE BOLTED AND/OR WELDED FROM REAR FENDER TO FRONT OF FOOT REST OR FRAME (CALL ?)
11. A REAR BUMPER IS PERMITTED BUT IS NOT ALLOWED TO EXTEND MORE THEN 4 INCHES OUT AND IT MUST STAY IN BETWEEN THE TIRES ALSO NO SPIKES, SHARP EDGES OR ANY PERTUSIONS ALLOWED (BUMPER CAN BE HOME MADE WITH I/H BEAM OR SQ. TUBING. CALL?)
12. REGEARING AND CHANGING OF PULLEYS TO INCREASE SPEED IS PERMITTED AND ENCOURAGED.
13. ANY AND ALL DRIVE TRAIN MODIFICATIONS IS PERMITTED BUT MUST STAY BUILT DRIVEN.
14. ALL MOWERS MUST USE LAWN MOWER TYPE WHEELS TRACTOR TREADS AND CUT TIRES WILL BE PERMITTED BUT NO TIRE CHAINS OR DUAL WHEELS WILL BE ALLOWED.
15. MOWER DECKS MUST BE REMOVED
16. ALL HEAD LIGHTS AND ANY OTHER GLASS AND PLASTICS MUST BE REMOVED BEFORE YOU ENTER THE PITS.
17. BATTERIES MUST BE REMOVED FROM MOWER AND ONLY USED TO JUMP START THE MOWER BEFORE THE HEAT BEGINS IF A PULL START IS USED DRIVER WILL NOT BE PERMITTED TO RESTART ENGINE DURING THE HEAT.
18.FRONT BUMPERS ARE PERMITTED BUT ARE NOT ALLOWED TO EXTEND MORE THEN 4 INCHES OUT AND IT MUST STAY IN BETWEEN THE TIRES ALSO NO SPIKES, SHARP EDGES OR ANY PERTUSIONS ALLOWED (BUMPER CAN BE HOME MADE WITH I/H BEAM OR SQ. TUBING. CALL?)
.
19. ROLE-OVER* DRIVER IS OUT OF HEAT ALSO IF A DRIVER TOUCHES THE GROUND WITH A HAND OR A FOOT DRIVERS IS ALSO OUT OF THE HEAT
20. FOR SAFETY IF A MOWER DOES ROLE OVER ALL DRIVERS MUST STOP AND WAIT UNTIL THAT DRIVER UP-RIGHTS HIS MOWER AND GETS OFF THE TRACK
21. PLEASE PUT YOUR NUMBER ON EACH SIDE OF YOUR MOWER OR YOUR HELMET SO WE CAN TRACK THE WINNERS.
22. ALL GROUND RULES WILL BE GONE OVER IN A MOWERS DRIVERS MEETING BEFORE THE HEAT
Minis $300 to win bases on 7 cars.
$200 to win mowers If 20 mowers show, we will run 2 separate features. All mowers run feature #1 $200 to win. All mowers that can come back will run feature #2 $200 to win.
1. The cars are to be constructed according to the rules. If certain items are not specified, it doesn't mean it is legal. The judge's decision will be final, so call before you do something that you don't understand.
2. All cars must be on grounds one-hour before event to be inspected. Any cars arriving late will not be eligible to compete unless prior arrangements have been made. All cars must be removed immediately after the show or they will become the property of the local salvage yard.
3. The driver must be at least 18 years old to drive at all fairs, unless the fair board allows younger drivers. You must be able to prove age upon request to drive, or have a notarized document signed by a parent or guardian stating that parents assume all risks. No one under the age of 14 will be able to compete at any fair unless approved by fair board. Call first.
4. Approved racing helmets must be worn at all times. Goggles or a face shield, fire suit or long sleeve shirt must be worn. Long pants and closed toe shoes are mandatory. No shorts allowed. If a driver removes his/her helmet while the event is taking place they will forfeit all winnings and be disqualified for the night.
5. Any unsportsman like conduct by the driver or the crew will cause your car to be disqualified and forfeit of any winnings. The judge's decision will be final.
6. No liquor or intoxicating beverages allowed in pit area. Possession of alcohol or drugs in pits will result in disqualification of your car.
7. Drivers meeting will be held before the event is to start to explain rules and flags. Any car protest must be made at this time. All drivers must attend, attendance will be taken. If a driver misses for any reason, there car will be disqualified. All drivers meetings will be held 30 min. before start time.
8. A driver that is disqualified in the heat race for sandbagging or a intentional door hit, will not be allowed to compete anymore that evening. Heat race time limits and sandbagging marks will be used.
9. The purpose of the derby is to provide entertainment for the spectators. Anyone not complying with the rules will be barred from the event.
10. It is mandatory for everyone entering into the pits to purchase a pit pass.
11. If a car is found illegal, no entries will be refunded. Cars should be brought legal. Not having a set of rules is not our fault. The fair board or promoter reserves the right to approve or reject any entries. Cars will be subject to inspection after event.
12. The driver is the only person allowed to drive the car at the venue. The driver is the only person allowed around the car while their car is being inspected. Cars will be disqualified if rule is not followed.
PREPARATION OF CAR:
No trucks, vans, ambulances, jeeps, carry-alls, limousines, Hearse, 4-wheel drives, checker cabs, propane cars, 73 or older Chrysler imperials. No Chrysler bodies on imperial frames. 2003 and newer Fords must remain factory (drive line, rear end, and bumpers are the only things that can be changed). This includes the cradle. In 2010, there is to be no shortening of rear frame rails in any manner. In the matter of clipping cars, there is to be no MIX-MATCHING of frames. Ford to Ford. GM-to-GM ECT. No shortening of cars in 2010. Cars are to be constructed according to rules. Judges decision is FINAL.
FRAMES:
1.There is to be NO painting of frames. If you are painting a frame you are cheating and you won't run.
2. ALL factory frame holes must remain OPEN
3. All cars may be pitched in the front. There is to be no metal added when pitching a car.
4. The rear humps may be plated. The plate may be ¼ in. steel, maximum 22 inches in length from end to end, must be cut to contour of frame, placed in center of hump and this plate must be on the outside only. The rear arch plate must have no more curve than a crescent shape.
5. A 3x3 Washer may be welded over the CENTER of each body mount hole. TOP SIDE ONLY.
6. You may have a 5 inch long piece of angle welded to frame to set the cross member on if you like
7. All cars must use the factory core support mounts. There is to be no welding of angle iron or pipe to the side of the frame to mount your core support. This mount is considered a body mount. It can ONLY be strengthened with a 3x3 washer. Fords must run factory mounts.
8. You may have ball joint stops, but they must be bolted on only.
9. On 80-89 Ford's, you may add the Factory gusset behind the crush box. This is the gusset that is found on 90 and newer cars. This gusset must be installed in the factory manner. When adding these gussets you MUST paint them WHITE.
10. No welding, plating, or pinning of frames. You may weld the top seam from the front of the A-Arms forward. NO OTHER FRAME SEAMS MAY BE WELDED.
11. You may repair a bent frame. You may only use 4 plates no larger than 4x6. Plates may be welded on all 4 sides. No more than 2 patches on any corner of the car. No part of the patch OR the weld may touch. 4 Patches MUST be painted white. You may reclip a bent car. When doing this, you may only use the butt weld method.
12. Rust damage may be repaired with the same size metal. No more than a 1-inch over lap.
ENGINGES:
1.Engines and transmissions may be interchanged.
2. Motor mounts may be welded, but no extra bracing to frame.
3. NO SKID PLATES. Oil pans and transmission pans may be strengthened.
4. Radiators must remain in stock location. You cannot run extra radiators or water supplies.
5. Transmission and oil coolers are allowed.
6.Transmission/oil coolers and battery boxes cannot strengthen frame in anyway
7. Batteries must be moved. You can use 2 batteries, but they must be securely mounted in passenger side floorboard area. Batteries must be covered.
8. All fuel cells and fuel lines must be covered in area where they may become pinched or cut.
9. Engine Mounting plates are legal, but they cannot connect to anything but the engine. They cannot reinforce the car in any way.
10. You may have 2 spots of wire or chain coming off front side of motor going to the engine cradle only
Tires:
No studded tires. Valve stem protectors are OK. We do not want flats.
CAGES: Standard 4 point cage MAX.
1. A cage of no bigger than 4 in. pipe or 4x4 in. box tubing can be used. (Standard 4 Point Cage Only) 4in MAX! (This will be enforced in 2010).
2. The front 2 down legs can be welded to the topside of frame only (welded to the side rail only). These legs must be vertical and cannot have plates or gussets welded off of them going to the frame. They MAYNOT be welded to the front clip in any way.
3. Front bar of cage running under dash must be 6 in. behind front firewall. It cannot have kicker going to the firewall. There is to be nothing welded from the dash bar going to the firewall or butted to the firewall. Only 1 dash bar.
4.The cage may have an overhead bar or roll over bar. The roll bar must be straight up and down, no pitch towards rear of car. The down legs may be welded to the topside of the frame only. This bar must be within 6 inches of the doorpost. 2 door cars, 6in from the back of the drivers seat. (This will be measure with steel block).
5.Sidebars no longer than 4in. past dash or rear bar.
6. Drivers may add 1 down bar next to their seat or legs. This bar is for safety only. The bar can only connect to the driver's door bar. It must be vertical and must be at least 12 in behind the front cage leg.
Protectors: In 2010 we will be using a steel 6in block to measure in between the dash bar and the firewall. Also from the gas tank protector to the rear firewall. Any part of the cage that prevents the block from passing thru will have to be cut. (Must be 6in at the top and bottom of bar). DP= Distributor Protector
1. DP's are legal in the follow manner. They can be no wider than the intake. They must be straight up and down only. DP's may bolt to the engine ONLY!
2. DP's can be butted to the firewall. (NO WELDING, BOLTING, OR ATTATCHING PROTECTORS TO THE FIRE WALL). Dash bar must be 6in behind firewall.
3. Protector cannot strengthen frame in anyway.
4. Cars running windshield bars may only tack weld the bar to the firewall 6in to either side of the DP. 2 bars max.
5. If you run a DP, you may not have anything running from the firewall to the dash bar. (No all-thread, bars, or any other solid material.)
6.You may run a gas tank protector in the following manner.
7. Gas tank Protector may not be any more than 36 inches wide.
8. Protector must be at least 6in from rear firewall. Do not beat firewall back.
9. Protector must be at least 3 inches off the floor.
10. The protector may not connect to anything other than the seat bar of the cage.
BODY: cars must be stripped of all flammable materials.
1.Doors may be welded solid, including the tops of doors. 3in strapping max.
2.Body mounts may be changed. Max bolt size 1in. Mounts cannot go thru the bottom side of the frame. Body mount washers cannot exceed 4x4. . Body bushings may be removed, but must use a 1in spacer in its place.
3. ROOF SIGNS ARE MANDITORY! They may be welded or bolted. Signs may not be any more than 24 in. long.
5. A 12 in. hole must be cut in hood above carburetor. Half hoods on car are OK. If no hood, no fan on motor. If fan blades become exposed, car is disqualified.
6. Hood is allowed 6 fasteners. Neither the hood nor any wires can be bent down in front of radiator. Hood Washers may be no more than 6x6.
7. Core Support may be bolted down with All thread 1 in. maximum may be ran thru core support next to radiator only, one on each side. They can go thru the hood.
8. No bolting or welding of body panels together, with the exception of fender wells. Fender wells may be bolted together using 4 bolts 5/16ths or smaller.
9. Rusty panels may be patched by using no more than 1in overlap. You must patch rust with the same thickness of metal, if thicker metal is used it will be cut off.
10. If car has been previously ran, we would allow you to repair body to keep it from falling off.
11. No internal bracing of body.
12. No interior seam welding on any body parts.
13. There can be no bars in the rear window
14. Car must have a safety strap in place of windshield. If using a bar or welded strap, they may be welded to the fire wall no closer than 6in. from the edge of the DP.
3.Firewalls must be in original place with no extra metal or weld added. All holes must be covered to prevent hot fluids from entering the driver's compartment.
TRUNKS:
1.A 12 in. hole must appear in trunk lid, not in the trunk floor. Tail light areas must remain open. TAIL LIGHT HOLES DO NOT MAKE YOU 12IN HOLE.
2. No wedged cars. (Unless it happens naturally during the derby) Trunks may be tucked.
3. Trunk lids can be welded solid with 3-inch wide strips 1/4 thick and cannot be overlapped. Strapping cannot be welded to rear window post. Trunk lids may not be moved.
4. Trunks may be "V'd" in the center but the back quarters must remain in the stock position. If you rip the rear post when V'ing the trunk, YOU CANNOT PATCH IT! If a car has a patch on the rear post (that is not rusty), they will cut the entire patch and the entire weld off the post.
5. Speaker trays may be beat down or removed, but they may not be altered with weld.
6.You may have 1 piece of 1 inch all thread in the center of the trunk with max 3x3 washers. Tail light areas must remain open.
7. You may weld 2 straps from you trunk lid to the bumper. These straps may not exceed 3in. in width.
8. All creased cars will have to cut inspection holes in creases per judge's decision. 1-3 per side depending on how the creases are made.
BUMPERS:
1.Any year car bumper and bumper brackets allowed on any car.
2. The bumper must be fastened with factory brackets no homemade brackets.
3. You cannot use rear brackets on the front of the car.
4. Bumpers can be welded solid to the frame. You may weld straps from the bumper to the frame on all 4 sides. Straps may only be welded to the first 2 in. of the frame.
5. Bumpers cannot be welded to the body.
6. Bumpers must have factory skin and factory backing.
7. You may load the inside of the bumper if you like. You can weld the bumper skin.
8. Maximum bumper height is 24 in. to bottom of bumper, minimum is 16 in. In 2010 this will be checked before the heats.
9.You may hard nose a bumper. You may stub the frame back to core support mount. Core support mounts may not be relocated. You may weld shock to the frame back to factory bolting spot. No welding past that point. Shocks may only be bolted in factory manner. No relocating bolts.
SUSPENSION:
1. All suspensions must have the ability to work in the factory manner.
2.You may bolt the front suspension solid with one 1/2 bolt per side. The head of the bold may be welded to the frame.
3. No all thread for shocks.
4. Any factory 5-lug axle rear end allowed. No 8-lug conversions. No changing of coil to leaf springs.
5. Coil springs may be tack welded or wired to brackets.
6. Rear end protectors cannot come within 6 inches of frame.
7. On leaf spring cars, no more than 7 per side and no wider than 2-½ inches. No Flat springs. Factory Stagger. No leafs on top of main leaf. No leafs thicker than 1/4in. 8. Only 3 leaf clamps per side. These clamps can be no wider than 3 inches and leafs cannot be welded together.
9.You may modify or weld tie rod ends and control arms.
10. Sway bar may be modified, but can not strengthen the frame.
11. Rear suspension must move.
12. Control arms may be strengthened.
Minis & Mini Car Enduro
1. All above rules apply to mini cars.
2. No AMC's
3. Cars can have a maximum of 108 in. wheelbase. Wheelbase can not be altered to achieve 110in.
4. Cars with electric fuel pumps must be wired to shutoff by switch that is clearly marked.
5.Cars may run any motor or tranny combination, no reinforcement of motor cradle.
6. Leaf spring cars must run factory leaf setup.
7.Cars can run gas tank protectors. They are to be constructed in this manner. Gas tank must connect to cage. You may use 2 pieces of 4x4 angle iron and 1 piece of ¼ in plate to box it in. Tank must be mounted so that long side of tank is parallel with seat bar.
TRUCK RULES:
Any full size or ¾ truck allowed. 4x4 trucks are legal, but front drive shaft must be removed. S.U.V.'s and Vans are legal.
Fuel Tank: Stock fuel tanks must be removed. A METAL boat tank or fuel cell must be placed in the bed of the truck, against the cab. Fuel line must be mounted securely.
Body: Doors must me welded or wired shut. But must be bolted or welded to the cab. Rust can be patched with same gauge metal, no more than 1-inch overlap. Truck beds may be interchanged but must utilize factory frame mounts. May only run Factory style beds, No utility or homemade beds. Body can be bolted solid to frame. Body mount bolts may be replaced with bolts no lager than 1in. Washers may be no bigger than 3in x3in. Tailgates may be welded solid. Tailgates may be dropped. You may run 9 wire from bedside to bed side in 1 place. May bolt hood down with max 6 1-inch bolts.
Cage: You may run a 4-point cage inside the cab of the truck. Cage can be welded to the frame. You can run a gas tank protector in the bed of the truck. It may not connect to cage. Protector can only be 36 in wide. This is to protect gas tank only.
Bumpers: May use any OEM automotive bumper (no farm Bumpers). Bumper must have a factory front and back skin. Bumpers can be welded together. Trucks may use home made mounting brackets. Brackets may be welded to the frame. Brackets can be no larger than 6 inches. NO OTHER WELDING ON THE FRAME ANYWHERE.
Drive Line: Any motor transmission combination. 8Lug rear ends are OK.
Suspension: Leafs have to be stock or less than stock, no flat leafs must have an arch to them. 3 claps per side.
Tires: No paddles, no v-treads. No split Rims. No bead locks.
MOWER RULES
1. MOWER MUST BE A FACTORY AVAILABLE MOWER LAWN OR GARDEN MOWER (NO HOME MADE FRAMES)
2. NO REAR ENGINE LAWN MOWERS ARE ALLOWED.
3. ENGINE MUST BE FACTORY LAWN MOWER ENGINE SUCH AS BRIGGS & STRATTON, TECUMSEH, ONAN ETC.
4. ALL FRAME MODIFICATION AND FRAME REINFORCING WILL BE ALLOWED.
5. TRANSAXLES MUST BE FACTORY AVAILABLE MOWER TRANSAXLES BUT ANY REINFORCING AND/OR WELDING OF SPIDER GEARS IS PERMITTED
6. ENGINE BAY REINFORCING IS PERMITTED BUT MUST BE CONTAINED INSIDE OF HOOD AND MUST MAINTAIN FACTORY BODY LINES
7. ALL MOWERS MUST RUN A FACTORY HOOD AND FENDERS AND HAVE THE HOOD EITHER SCREWED OR WELDED DOWN TO DASH PANEL AROUND DRIVERS AREA ( NOTE IF HOOD IS FIBERGLASS YOU CAN MAKE ONE OUT OF SHEET METAL ONLY BUT MUST BE THE SAME SIZE AS THE FIBERGLASS ONE)
8. MOWERS MUST HAVE GOOD BRAKES AND FORWARD AND REVERSE GEARS AT THE START OF THE HEAT.
9. GAS TANK MUST BE SECURED AND HAVE A CAP ON IT (ANY GAS AT ALL LEAKING AND YOU WILL BE ASK TO SHUT IT DOWN)
10. LEG GUARDS ARE MANDATORY AND MUST BE BOLTED AND/OR WELDED FROM REAR FENDER TO FRONT OF FOOT REST OR FRAME (CALL ?)
11. A REAR BUMPER IS PERMITTED BUT IS NOT ALLOWED TO EXTEND MORE THEN 4 INCHES OUT AND IT MUST STAY IN BETWEEN THE TIRES ALSO NO SPIKES, SHARP EDGES OR ANY PERTUSIONS ALLOWED (BUMPER CAN BE HOME MADE WITH I/H BEAM OR SQ. TUBING. CALL?)
12. REGEARING AND CHANGING OF PULLEYS TO INCREASE SPEED IS PERMITTED AND ENCOURAGED.
13. ANY AND ALL DRIVE TRAIN MODIFICATIONS IS PERMITTED BUT MUST STAY BUILT DRIVEN.
14. ALL MOWERS MUST USE LAWN MOWER TYPE WHEELS TRACTOR TREADS AND CUT TIRES WILL BE PERMITTED BUT NO TIRE CHAINS OR DUAL WHEELS WILL BE ALLOWED.
15. MOWER DECKS MUST BE REMOVED
16. ALL HEAD LIGHTS AND ANY OTHER GLASS AND PLASTICS MUST BE REMOVED BEFORE YOU ENTER THE PITS.
17. BATTERIES MUST BE REMOVED FROM MOWER AND ONLY USED TO JUMP START THE MOWER BEFORE THE HEAT BEGINS IF A PULL START IS USED DRIVER WILL NOT BE PERMITTED TO RESTART ENGINE DURING THE HEAT.
18.FRONT BUMPERS ARE PERMITTED BUT ARE NOT ALLOWED TO EXTEND MORE THEN 4 INCHES OUT AND IT MUST STAY IN BETWEEN THE TIRES ALSO NO SPIKES, SHARP EDGES OR ANY PERTUSIONS ALLOWED (BUMPER CAN BE HOME MADE WITH I/H BEAM OR SQ. TUBING. CALL?)
.
19. ROLE-OVER* DRIVER IS OUT OF HEAT ALSO IF A DRIVER TOUCHES THE GROUND WITH A HAND OR A FOOT DRIVERS IS ALSO OUT OF THE HEAT
20. FOR SAFETY IF A MOWER DOES ROLE OVER ALL DRIVERS MUST STOP AND WAIT UNTIL THAT DRIVER UP-RIGHTS HIS MOWER AND GETS OFF THE TRACK
21. PLEASE PUT YOUR NUMBER ON EACH SIDE OF YOUR MOWER OR YOUR HELMET SO WE CAN TRACK THE WINNERS.
22. ALL GROUND RULES WILL BE GONE OVER IN A MOWERS DRIVERS MEETING BEFORE THE HEAT