|
Post by etownrdnck on Aug 16, 2010 18:44:58 GMT -5
I bent my power steering pump pulley. Should i replaced the entire pump or just the pulley if so how do you remove pulley.
|
|
|
Post by helm024j on Aug 17, 2010 22:09:03 GMT -5
we have a ps puller,but you need to make sure the shaft isnt bent,or the seal will wear out prematurely
|
|
montana
Backyard Mechanic
Posts: 326
|
Post by montana on Aug 25, 2010 17:16:43 GMT -5
Just chuck the pump and run without it.
|
|
|
Post by 307ci on Aug 26, 2010 20:14:48 GMT -5
just run with out the power steering... dont need it,,,, i have to run my next year with out it
|
|
|
Post by hardhitinu on Aug 26, 2010 20:25:29 GMT -5
if you cann't find another pully or pump then run without it
|
|
Comet_Cyclone
Backyard Mechanic
rookie
Comet Cyclone 1964
Posts: 323
|
Post by Comet_Cyclone on Mar 3, 2012 23:00:56 GMT -5
run pumps on vic's.... if you don't you will break the steering box...question is when?
|
|
|
Post by DemolitionMission on Mar 4, 2012 1:14:57 GMT -5
^^^ Yes. 80s and 90s fords will break the steering a lot easier if you don't have power steering. You can rent a power steering pulley puller from advance auto, you get your money back when you return the puller. BUT, it might be a lot easier to go to a junkyard to get another power steering unit. 3 bolts and its off. Take the hoses with it
|
|
|
Post by etownrdnck on Mar 4, 2012 20:10:44 GMT -5
^^^ thats what i did last year mitch but this year im good
|
|