|
Post by etownrdnck on Aug 4, 2011 21:43:06 GMT -5
Got this one for 2012 along with my 90 Vic. This one i have alot more planned if the promotor will allow such as creasing, hardnosing, dimpling, possibly truck springs up front and headers,etc. Stay tuned
|
|
|
Post by DemolitionMission on Aug 5, 2011 2:25:46 GMT -5
The 2nd car is always better than the first one. Now you know what to do to this thing
|
|
|
Post by etownrdnck on Aug 6, 2011 21:57:35 GMT -5
yea thats what im hopin.... im gonna try to get it to roll in better then my 90 did with either notches or bigger dimples and thinking or tucking or flippin the trunk upside down.... speaking of that does anyone know which one is better to do for this type of car or have any tricks for me it is a stoney roberts show....
|
|
|
Post by scooter24d on Nov 30, 2011 8:06:34 GMT -5
i think the tuck will work good for ya have you got any thing done on it?
|
|
|
Post by derby111 on Dec 1, 2011 10:31:14 GMT -5
i ran in a class with rules similar to yours this year against some 80s ford and not of them were tucked. they all somehow bent up but the rear looked like crap! i would tuck and notch it just so you have a better chance of it all packing in nice. also make sure you have a steel front bumper!
|
|
|
Post by etownrdnck on Dec 1, 2011 21:29:37 GMT -5
yea i have it gutted and all stripped down the battery moved but found out the rear main seal is leaking but im gonna run it anyway just gonna keep an eye on it. I also have the hood moved forward like six inches and bent down in front of the rad hopefully it passes. Derby111 yea i plan on gettin a steel gor up front and these cars tend to go up without and prep in the rear but im either tucking it or flipping the trunk upside down with notches or dimples depends on how much time i have and the tools ill have by then ill post pics in the spring when its done
|
|
|
Post by 96greenchevy on Dec 2, 2011 1:02:59 GMT -5
i tucked my trunk and knoched and when the rear started rolling up it pushed the trunk lid up in to the rear windshield
|
|
|
Post by 307ci on Dec 2, 2011 23:21:27 GMT -5
definatly tuck and notch
|
|
|
Post by etownrdnck on Dec 5, 2011 13:10:08 GMT -5
Heres the front hood bent down and the height my front bumper is gonna be I think the front suspension sits pretty good stock Interior stripped still got a little cleanin to do but using the inside for storage lol These tires are going on the back as of now unless i can get better mud or snow tires Heres the rear window i have never seen one like this but hey its easier to remove lol
|
|
|
Post by etownrdnck on Dec 5, 2011 18:01:23 GMT -5
well i have decided to tuck and notch the rear on it i think it will be good along with other little tricks
|
|
|
Post by DemolitionMission on Dec 6, 2011 11:17:17 GMT -5
Hmm aftermarket window?
Front hood looks good. Be sure to pull the rubber bump stops out from underneath the A-Arms on the frame. Should raise it another inch.
|
|
|
Post by etownrdnck on Dec 6, 2011 11:20:30 GMT -5
no thats a stock window i pulled the vinyl top off and that was underneath. yea im goin to pull them out also
|
|
|
Post by scooter24d on Dec 7, 2011 8:36:32 GMT -5
looking good
|
|
|
Post by etownrdnck on Dec 7, 2011 11:17:33 GMT -5
thanks man it should be a tank hopefully this year
|
|
|
Post by etownrdnck on Dec 7, 2011 18:38:54 GMT -5
well got a new solenoid for it today autozone said like 17 dollars so i just bought one for my truck which was 11 dollars lol
|
|